DR MARC DUPUIS alias Max Spree

LinkedIn






Selected Publications


CELL STABILITY STUDIES USING THE MOST RECENT MHD-VALDIS CODE VERSION

INFLUENCE OF THE CATHODE SURFACE GEOMETRY ON THE METAL PAD CURRENT DENSITY

FURTHER IMPROVEMENT OF ALUMINIUM REDUCTION CELL RESISTANCE SLOPE CALCULATION

THE STARPROBETM: A NEW TECHNOLOGY ALLOWING SIMULTANEOUS MEASUREMENTS OF FOUR CRYOLITIC BATH PROPERTIES IN ONLY FOUR MINUTES

BATH RATIO AND TEMPERATURE CONTROL ENHANCEMENT IN THE POTROOM

TESTING A NEW STARPROBETM MEASUREMENT BASED RATIO CONTROL ALGORITHM USING A DYNAMIC CELL SIMULATOR

PRODUCTION APPLICATION STUDY ON MAGNETO-HYDRO-DYNAMIC STABILITY OF A LARGE PREBAKED ANODE ALUMINUM REDUCTION CELL

IN DEPTH ANALYSIS OF ENERGY-SAVING AND CURRENT EFFICIENCY IMPROVEMENT OF ALUMINUM REDUCTION CELLS

MEASURING BATH PROPERTIES USING THE STARPROBETM

ENERGY SAVING FROM A REDUCTION POT

DEPTH ANALYSIS AND POTENTIALITY EXPLOITATION ON ENERGY-SAVING AND CONSUMPTION-REDUCTION OF ALUMINUM REDUCTION POT

MODELING CATHODE COOLING DUE TO POWER INTERRUPTION

MODELLING CATHODE COOLING AFTER POWER SHUTDOWN

TESTING CELL CONTROLLER ALGORITHMS USING A DYNAMIC CELL SIMULATOR

TESTING IN SITU ALUMINIUM CELL CONTROL WITH DYNA/MARC CELL SIMULATOR

USING ANSYS AND CFX TO MODEL ALUMINIUM REDUCTION CELL SINCE 1984 AND BEYOND

DEVELOPMENT AND APPLICATION OF AN ANSYS BASED THERMO-ELECTRO-MECHANICAL COLLECTOR BAR SLOT DESIGN TOOL

RETROFIT OF A 500 KA CELL DESIGN INTO A 600 KA CELL DESIGN

DEVELOPMENT AND APPLICATION OF AN ANSYS® BASED THERMO-ELECTRO-MECHANICAL ANODE STUB HOLE DESIGN TOOL

MATHEMATICAL MODELLING OF ALUMINUM REDUCTION CELL POTSHELL DEFORMATION

MATHEMATICAL MODELING OF ALUMINIUM REDUCTION CELL POTSHELLS: IMPROVEMENTS AND APPLICATIONS

CHALLENGES IN STUB HOLE OPTIMISATION OF CAST IRON RODDED ANODES

IMPACT OF THE VERTICAL POTSHELL DEFORMATION ON THE MHD CELL STABILITY BEHAVIOR OF A 500 KA ALUMINUM ELECTROLYSIS CELL

MODELLING THERMAL DYNAMIC RESPONSE TO A 3-HOUR TOTAL POWER SHUTDOWN EVENT

CELL VOLTAGE NOISE REMOVAL AND CELL VOLTAGE (OR RESISTANCE) SLOPE CALCULATION

THERMO-ELECTRO-MECHANICAL MODELING OF A HALL-HÉROULT CELL COKE-BED PREHEATING

COMPARING THE MHD CELL STABILITY OF AN ALUMINIUM REDUCTION CELL AT DIFFERENT METAL PAD HEIGHT AND LEDGE THICKNESS

BUSBAR SIZING MODELING TOOLS: COMPARING AN ANSYS® BASED 3D MODEL WITH THE VERSATILE 1D MODEL PART OF MHD-VALDIS

THERMO-CHEMO-MECHANICAL MODELING OF A HALL-HÉROULT CELL THERMAL BAKE-OUT

MHD AND POTSHELL MECHANICAL DESIGN OF A 740 KA CELL

EXCESS ALF3 CONCENTRATION IN BATH CONTROL LOGIC

IMPACT OF USING SELECTIVE COLLECTOR BAR RODDING ON THE MHD STABILITY OF A 500 KA ALUMINIUM ELECTROLYSIS CELL

STUDY OF THE THERMALLY-INDUCED SHELL DEFORMATION OF HIGH AMPERAGE HALL-HÉROULT CELLS

WEAKLY COUPLED THERMO-ELECTRIC AND MHD MATHEMATICAL MODELS OF AN ALUMINIUM ELECTROLYSIS CELL

THERMO-ELECTRIC DESIGN OF A 740 kA CELL, IS THERE A SIZE LIMIT?

ACCURATE ASSESSMENT OF THE HIRAKUD SMELTER ALUMINIUM REDUCTION CELL THERMAL BALANCE USING ONLY TEMPERATURE MEASUREMENTS

DEMONSTRATION THERMO_ELECTRIC AND MHD MATHEMATICAL MODELS OF A 500 kA ELECTROLYSIS CELL: PART 2

CALCULATING TEMPERATURE UNDER HOOD OF A PREBAKE ANODE CELL

DEMONSTRATION THERMO_ELECTRIC AND MHD MATHEMATICAL MODELS OF A 500 kA ELECTROLYSIS CELL

THERMO-ELECTRIC DESIGN OF A 500 KA CELL

INDIAN ALUMINIUM SMELTERS ROADMAP SELECTS MATHEMATICAL MODELING AS KEY STRATEGIC ACTIVITY

PERFORMING FAST TREND ANALYSIS ON CELL KEY DESIGN PARAMETERS

TOWARDS THE DEVELOPMENT OF A 3D FULL CELL AND EXTERNAL BUSBARS THERMO-ELECTRIC MODEL

USING MATHEMATICAL MODELS TO IMPROVE THE THERMAL BALANCE OF HALL-HÉROULT CELLS

USING ANSYS TO MODEL ALUMINUM REDUCTION CELL SINCE 1984 AND BEYOND

MODELING POWER MODULATION

COMPUTATION OF ACCURATE HORIZONTAL CURRENT DENSITY IN METAL PAD USING A FULL QUARTER CELL THERMO-ELECTRIC MODEL

3D MODELING OF THE VENTILATION PATTERN IN AN ALUMINIUM SMELTER "POTROOM" BUILDING USING CFX-4

USAGE OF A FULL 3D TRANSIENT THERMO-ELECTRIC F.E. MODEL TO STUDY THE THERMAL GRADIENT GENERATED IN THE LINING DURING A COKE PREHEAT

DEVELOPMENT OF A 3D TRANSIENT THERMO-ELECTRIC CATHODE PANEL EROSION MODEL OF AN ALUMINUM REDUCTION CELL

THERMO-ELECTRIC DESIGN OF A 400 kA CELL USING MATHEMATICAL MODELS: A TUTORIAL

DEVELOPMENT OF A 2D+ DYNAMIC MODEL OF AN ALUMINUM REDUCTION CELL

USING ANSYS® BASED ALUMINUM REDUCTION CELL ENERGY BALANCE MODELS TO ASSIST EFFORTS TO INCREASE LAURALCO´S SMELTER PRODUCTIVITY

ALUMINUM ELECTROLYSIS PROCESS SIMULATION

COMPUTATION OF ALUMINUM REDUCTION CELL
ENERGY BALANCE USING ANSYS® FINITE ELEMENT MODELS

INDUSTRIAL ALUMINUM ELECTROLYSIS TMS COURSE CHARLESTON 1997: PROCESS SIMULATION

CHARLESTON

ESTIMATION OF THE GAS EXHAUST RATE REQUIRED ON AN ALUMINIUM REDUCTION CELL DURING START-UP

SYMPOSIUM ÉLECTROLYSE 1997 CQRDA: OPTIMISATION DU PROCÉDÉ PAR MODÉLISATION

SIMULATION OF THE DYNAMIC RESPONSE OF ALUMINUM REDUCTION CELLS

USING A STEADY STATE MODEL OF AN ALUMINUM REDUCTION CELL TO INVESTIGATE THE IMPACT OF DESIGN CHANGES

PROCESS SIMULATION OF ALUMINUM REDUCTION CELLS

PRÉSENTATION DU CONGRÈS DE GÉNIE CHIMIQUE 1995

MODELLING OF MAGNETOHYDRODYNAMIC (MHD) FLOWS

MODELING OF ALUMINUM REDUCTION CELLS USING FINITE ELEMENT ANALYSIS TECHNIQUES

EVALUATION OF THERMAL STRESSES DUE TO COKE PREHEAT OF A HALL-HÉROULT CELL

THERMO-ELECTRO-MAGNETIC MODELING OF A HALL-HÉROULT CELL

THERMO-ELECTRIC ANALYSIS OF THE GRANDE-BAIE ALUMINUM REDUCTION CELL

THERMAL STUDY OF THE COKE PREHEATING FOR HALL-HEROULT CELL

SHELL DESIGN TECHNIQUE CONSIDERING THE SODIUM SWELLING PHENOMENA OF CARBON CATHODE BLOCKS

TURBULENCE MODELING OF AIR CIRCULATION IN AN ENCLOSURE WITH MULTIPLE OPENINGS AND LOCAL HEAT SOURCES

ANSYS NEWS: ANSYS IN THE ALUMINUM INDUSTRY

THERMO-ELECTRIC ANALYSIS OF ALUMINUM REDUCTION CELLS

THERMO-ELECTRIC COUPLED FIELD ANALYSIS OF ALUMINUM REDUCTION CELLS USING THE ANSYS PARAMETRIC DESIGN LANGUAGE

CATHODE SHELL STRESS MODELLING

LA MODÉLISATION DE LA TURBULENCE DANS UNE ENCEINTE AVEC OUVERTURES ET SOURCES CHAUDES LOCALISÉES

SIMULATION MATHÉMATIQUE DE LA CIRCULATION DE L'AIR DANS UNE ENCEINTE AVEC OUVERTURES ET SOURCES CHAUDES LOCALISÉES





GéniSim Inc. 3111 rue Alger Jonquière Québec G7S 2M9
Tél: (418) 548-1541 Fax: (418) 548-4215 E-mail: